Bend 3DP
Bend 3DP - Milwaukee Power Head (3016-20) Wall Mount
Bend 3DP - Milwaukee Power Head (3016-20) Wall Mount
Couldn't load pickup availability
Organize your workspace and charge ahead with this 3D‑printed wall mount designed specifically for the Milwaukee® M18 FUEL™ power head (model 3016). Thoughtfully engineered and precision‑printed for durability, this mount keeps your power head securely stored, off the floor, and within easy reach.
🔧 Key Features
🧩 Custom Fit & Secure Grip
Tailored Design: Precisely contoured to cradle the 3016-20 power head, with reinforced clip zones that lock into the tool’s unique profile.
Anti‑slip Holding: Inner contact surfaces feature a gentle textured pattern to prevent accidental slippage without damaging the finish.
🛠️ Rugged, Stable Construction
Solid Laminate Structure: Printed using high‑infill PETG for enhanced rigidity, reducing flex or fatigue.
Layer‑by‑Layer Confidence: Well‑designed print orientation minimizes stress points, ensuring long‑lasting strength even under repeated use.
🧭 Space‑Saving & Canvas‑Clearing
Wall‑Mounted Efficiency: Lifts bulky tools off benches and floors, freeing up workspace and keeping corridors clear.
Slim Profile: Less than 4″ depth from wall—compact footprint keeps your workshop flow unobstructed.
⚡ Easy, Hassle‑Free Installation
Quick‑Fit Template: Includes a paper template for precise drilling.
Universal Hardware Ready: Mounts with 2 screws and anchors (included), letting you install in drywall, wood, or concrete in minutes.
Ambidextrous Design: Symmetrical geometry accommodates left- or right‑handed orientation depending on wall layout.
🛎️ Practical & Professional
Open Top Design: Grab or hang the tool without pushing pins or sliding slots—instant access, no fumbling.
Tool‑Forward Access: Mounts it rear-first so the head protrudes forward for easy one-handed removal.
🍃 Clean & Modular Look
Smooth, Matte Finish: Visually pleasing, with clean lines that complement both workshop and garage aesthetics.
Scalable System: Stack multiples for other M18 tools, turning wall space into a fully modular tool organization system.
🔍 Specifications
| Detail | Value |
|---|---|
| Material | High‑infill PETG (3D‑printed) |
| Dimensions | ~2″ H × 2″ W × 4″ D (wall‑to‑front) |
| Weight (empty) | ~3.5 oz (100 g) |
| Mounting | 4× wall screws & anchors |
| Capacity | Milwaukee M18 FUEL™ 3016 |
Why It's a Must‑Have
Declutter & Protect: Picks up your power head, freeing bench space and guarding it from damage.
Ergonomic Efficiency: Ready at eye‑level and right‑handed… or left‑handed—for faster, safer workflow.
Lasts Workout After Workout: The PETG structure resists wear, vibration, and everyday rough usage.
Upgrade your tool storage with practical engineering—3D‑printed, Milwaukee‑specific, workshop-smart. No more tripping hazards, no more tool piles—just instant access to your 3016-20 and a tidier, more productive workspace.
Share
Frequently Asked Questions
What is a Diesel Heater Port?
A diesel heater port is a wall-mounted pass-through that allows you to bring hot air from an external or portable diesel heater into your truck camper, van, trailer, or workshop. It provides a clean, safe, weather-sealed opening for a 3” heater hose.
What size hose does this port fit?
This port is designed for a 3-inch (75mm) diesel heater hose, compatible with Vevor, Planar, and common Chinese diesel heaters.
Is this product heat resistant?
Yes. It is printed from PET-CF (carbon-fiber reinforced PET), which can withstand up to 205°C. Diesel heaters typically output around 90–95°C, well within the safe range.
Is this Diesel Heater Port weatherproof?
Yes. It features a weather-sealed mounting surface and a threaded lid that protects against rain, snow, dust, and road spray when the port is not in use.
Can I install this port on any flat surface?
Yes — the port mounts cleanly to truck campers, vans, trailers, teardrops, sheds, and any flat wall surface including aluminum, fiberglass, wood, and composites.
Is installation difficult?
Installation takes 20–45 minutes. Cut the circular opening with a 2.75" Hole Saw, drill the mounting holes with a 1/4" drill bit insert the port, and secure it with the provided hardware. Only basic tools are required.
Does the kit include the hose adapter?
Yes. The kit includes a 3” or a 3.5" twist-lock hose adapter, main port assembly, exterior mounting plate, threaded lid, and stainless hardware.
Will this work with portable diesel heaters?
Absolutely — this port is made for users who run their diesel heater outside the camper and pipe hot air inside safely and cleanly.
Is this compatible with all diesel heater brands?
Yes — works with Vevor, Planar, Hcalory and other Chinese diesel heaters (2kW, 5kW, 8kW), and any system with a 3” or 3.5" hot air outlet.
Can I close the port when not in use?
Yes — the threaded lid seals tight to keep out weather, bugs, and debris when the heater is not connected.